OK

 

Tilbehør

 

 

 

 

Raspberry Pi official power supply, micro USB, 5.1 V, 2.5 A, EU plugFalsehttps://www.deltaco.dk/kategorier/el-og-installation/opladere-strømadaptere/strømadaptere/usb/RPI-1057Raspberry Pi official power supply, micro USB, 5.1 V, 2.5 A, EU plug11-01-2019 13:50:1831-12-1899 23:00:0031-12-1899 23:00:00 <BODY><P>Raspberry Pi official power supply, 5.1V, 2.5A, EU plug, black</P> <P>The recommended power supply unit for the Raspberry Pi. This mains power supply has a 1.5m cable and micro USB plug.</P> <P>• Input voltage: 90 - 264V AC<BR>• Output voltage: 5.1V<BR>• Output current: 2.5A<BR>• Plug type: 2-pin Type C - Euro Plug<BR>• Output connector: Micro USB<BR>• Power rating: 13W<BR>• Cable length 1.5m<BR>• Operating Temp. 0 °C to 40 °C<BR>• Storage Temp. -20 °C to +60 °C<BR>• Short circuit, overcurrent and over-voltage protection<BR>• Low standby current consumption</P> <P>Product measurements (LxWxH): 82.4 x 28.8 x 69mm<BR>Weight: 150g</P> <P><EM>Note<BR>The official Raspberry Pi power supply unit is for the Raspberry Pi boards only. It is not intended for general purpose use.</EM></P></BODY>NoneFalse
Raspberry Pi TV HAT, DVB-T/T2, aerial input, fits on 40-pin boardsFalsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/RPI-TVHATRaspberry Pi TV HAT, DVB-T/T2, aerial input, fits on 40-pin boards16-11-2018 08:52:2331-12-1899 23:00:0031-12-1899 23:00:00 <BODY><P>Raspberry Pi TV HAT DVB-T/T2, 40-way header, aerial adaptor, green</P> <P>The Raspberry Pi TV-uHAT is an add-on board for the Raspberry Pi. It enables you to expand the functionality of your Raspberry Pi board by receiving digital terrestrial TV broadcast systems which includes DVB-T and DVB-T2. <BR>The TV-uHAT is a compact module which comes in a newer form to previous models. It takes up minimal space and can be integrated into your design easily, without the need for lots of extra space. </P> <P>The Raspberry Pi TV-uHAT enables you to receive and watch TV via a Raspberry Pi board. You could also use it to create a TV server from which you stream over a network from other devices. <BR>Raspberry Pi is a flexible platform which enables you to design and prototype your ideas. If you need some inspiration there is a whole community around Raspberry Pi which is there to help you with blogs and forums: <A href="https://www.raspberrypi.org/">https://www.raspberrypi.org/</A></P> <P>• Sony CXD2880 TV tuner<BR>• 40-way header<BR>• Aerial adaptor<BR>• Mechanical spacers<BR>• Supported TV standards: DVB-T2, DVB-T<BR>• Reception frequency: VHF III, UHF IV, UHF V<BR>• Channel bandwidth:<BR>    DVB-T2: 1.7MHz, 5MHz, 6MHz, 7MHz, 8MHz<BR>    DVB-T: 5MHz, 6MHz, 7MHz, 8MHz</P></BODY>NoneFalse0707565827195
Raspberry PI wall mounting kitFalsehttps://www.deltaco.dk/varemærke/akasa/monteringsramme/A-RA03-WKTRaspberry PI wall mounting kit15-10-2018 11:32:2631-12-1899 23:00:0031-12-1899 23:00:00 <BODY><P>Akasa Raspberry Pi Wall Mounting Kit, 2x brackets, 4x screws, black</P> <P>Mounting brackets that allows Akasa Raspberry Pi cases to be mounted on the wall.</P> <P>Compatible with Akasa Pi-cases: A-RA04-A1B/A-RA04-M1B/A-RA03-A1B/A-RA03-M1B/A-RA02-A1B/A-RA02-M1B.</P> <P>Dimensions(WxDxH): 110x20x1.6mm</P></BODY>NoneFalse
Raspberry Pi WiFi dongle, nano size, IEEE 802.11b/g/n, blackFalsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/RPI-1058Raspberry Pi WiFi dongle, nano size, IEEE 802.11b/g/n, black02-10-2018 05:10:0131-12-1899 23:00:0031-12-1899 23:00:00 <BODY><P>Raspberry Pi WiFi dongle, nano size, IEEE 802.11b/g/n, black</P> <P>This dongle uses the plug and play Ralink RT5370 chipset, which requires no set up or installation on Raspian, XBMC or OpenElec, and features an integrated micro antenna to give you clear and constant WiFi signal.</P> <P>• Tiny nano dongle<BR>• Can be powered direct from the Raspberry Pi or from a powered hub<BR>• Tested for compatibility with the Raspberry Pi<BR>• Complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.11b standards<BR>• Provides max. 150Mbps receiving rate and 150Mbps sending rate<BR>• Supports 64/128-bit WEP, WPA/WPA2 encryption methods and 802.1x authentication standards<BR>• Supports WPS (Wi-Fi Protected Setup) encryption method to free you from remembering long passwords</P> <P>Product weight: 20g</P></BODY>NoneFalse
DesignSpark VESA Mount, for DesignSpark Raspberry Pi cases, blackFalsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/RPI-VESABDesignSpark VESA Mount, for DesignSpark Raspberry Pi cases, black30-08-2018 07:17:3431-12-1899 23:00:0031-12-1899 23:00:00 <BODY><P>DesignSpark VESA Mount for use with DesignSpark Raspberry Pi 3 Cases, black</P> <P>VESA Mounting Brackets for DesignSpark Raspberry Pi 3 cases<BR>These VESA mounting brackets enable you to mount a DesignSpark Raspberry Pi 3 case to the back of a display or monitor using the VESA attachment points. Note: Pi case not included.</P> <P>Each bracket includes a locking clip which can be used to prevent the SD card from being removed from the Raspberry Pi. </P> <P>Within the mounting bracket there is space to add a 2.5 inch hard drive for additional memory for your Raspberry Pi project.</P> <P>Dimensions(WxDxH): 110.09x110.09x18.50mm</P></BODY>NoneFalse
Raspberry Pi PoE HAT, official, for Pi 3 Model B+, onboard fanFalsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/RPI-POEHATRaspberry Pi PoE HAT, official, for Pi 3 Model B+, onboard fan22-08-2018 11:13:1931-12-1899 23:00:0031-12-1899 23:00:00 <BODY><P>Raspberry Pi official PoE HAT, for Raspberry Pi 3 Model B+, onboard fan</P> <P>The Raspberry Pi PoE HAT is used to power a Raspberry Pi 3 Model B+ via an Ethernet cable. Just make sure you are using PoE compatible equipment and cables.</P> <P>• 802.3af PoE<BR>• Fan control<BR>• 5V/2.5A DC output<BR>• 37–57V DC, Class 2 device<BR>• Fully isolated switched-mode power supply<BR>• 25mm x 25mm brushless fan for processor cooling<BR></P></BODY>NoneFalse
pi-topPULSE, LED matrix, speaker, microphone, use with Amazon AlexaFalsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/RPI-1055pi-topPULSE, LED matrix, speaker, microphone, use with Amazon Alexa12-03-2018 08:57:0431-12-1899 23:00:0031-12-1899 23:00:00 <BODY><P>pi-topPULSE Smart Speaker with LED Matrix, white</P> <P>pi-topPULSE is an accessory by pi-top to help build STEAM (Science, Technology, Engineering, Arts and Maths) based projects with music, lights and sound. The accessory can be used with pi-top or pi-topCEED, and furthermore as an add-on board to the Raspberry Pi 3. The microphone can be used to record music and a DIY cloud-based voice service for students to ask Computer Science related questions.</P> <P>Simply learn, play or create fun projects in lesson plans. The projects are suitable for beginners or experts aged 8 and over. </P> <P>LED Light array<BR>• 7x7 programmable RGB LED (49) Matrix<BR>• Fully configurable and easy to program - use Python to make patterns and pictures<BR>• High refresh-rate makes it perfect for animations that synchronise to sounds - either from the speaker, or the in-built microphone<BR>• 7 more LEDs are concealed around the board for fun - 3 on the bottom and 4 under the speaker grill - to put on a spectacular show of colour and sound</P> <P>Speaker<BR>• 2 watt 4 Ω speaker </P> <P>Microphone <BR>• Designed to integrate with Amazon Alexa, for a fully interactive ’smart’ cloud-based voice service<BR>• Raspberry Pi 3 and pi-top add-on compatible.</P> <P>Chassis<BR>• Dimensions: 67 x 60.5 x 15 mm (LxWxH)<BR>• Weight: 40.5 g<BR>• 4 magnetic feet for pi-top and pi-topCEED<BR>• 2 magnetic-spacers for Raspberry Pi 3<BR>• White injection mould ABS plastic <BR>• Raspberry Pi 3 and pi-top add-on compatible</P></BODY>NoneFalse5060474340946
Raspberry Pi officiell Micro USB nätadapter EU-UK plug 5,1V 2,5A svartFalsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/RPI-1048Raspberry Pi officiell Micro USB nätadapter EU-UK plug 5,1V 2,5A svart31-03-2017 10:24:4931-12-1899 23:00:0031-12-1899 23:00:00 <BODY><P>Raspberry Pi Official PSU, 5.1V, 2.5A, 13W, 1.5m cable, micro USB plug, UK/EU adapter, black</P> <P>The recommended power supply unit (PSU) for the Raspberry Pi 3. This mains power supply has a 1.5m cable and micro USB plug. It has 2 interchangeable plugs so you can use it in the UK and Europe.<BR>• Short circuit, overcurrent and over-voltage protection<BR>• Low standby current consumption</P> <P>• Input Voltage 90 → 264V ac<BR>• Output Voltage 5.1 V<BR>• Output Current 2.5A<BR>• Input Connector Socket<BR>• Power Rating 13W<BR>• Number of Outputs 1<BR>• Cable Length 1.5m<BR>• Ripple And Noise <120mV<BR>• Efficiency 80.86%<BR>• Maximum Input Current 0.5A<BR>• Application Official Raspberry Pi Power Supply<BR>• Input Frequency Range 47 → 63Hz<BR>• Maximum Temperature +40°C<BR>• Line Regulation ±2%<BR>• MTBF 50000h<BR>• Minimum Temperature 0°C</P> <P>Dimensions(WxDxH): 45.1x35.1x73.2<BR>Weight: 150g</P></BODY>NoneFalse5060214370066
Raspberry Micro USB Power supply 5V 2.5A WhiteFalsehttps://www.deltaco.dk/kategorier/el-og-installation/opladere-strømadaptere/strømadaptere/usb/væg/RPI-1033Raspberry Micro USB Power supply 5V 2.5A White29-02-2016 08:42:1931-12-1899 23:00:0031-12-1899 23:00:00 <BODY><P>Raspberry Pi Power Supply, Official power supply for Raspberry Pi 3 Model B, 5.1V 2.5A, white</P> <P>The official PSU for the new Raspberry Pi 3 Model B. The PSU has an integrated 1.5m long USB Type MicroB cable. With the adapter you get four interchangable mains adaptors so that you can use the PSU in Europe, Australia, UK and in the USA.</P> <P>• 5.1V 2.5A<BR>• Class II double insulated<BR>• ERP level 6 efficiency rating</P></BODY>NoneFalse
Raspberry Pi heatsinks for Pi and Pi 2/3, 2 parts, bulk, blackFalsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/RPI-1027Raspberry Pi heatsinks for Pi and Pi 2/3, 2 parts, bulk, black17-02-2016 14:00:4231-12-1899 23:00:0031-12-1899 23:00:00 <BODY><P>Raspberry Pi heatsinks for Pi and Pi 2/3, 2 parts, bulk, black</P> <P>The kit consists of two high quality aluminum heatsink, each selected to perfectly match the size of the CPU and Ethernet controller.</P> <P>• Broadcom CPU heatsink - 14x14x14mm<BR>• Ethernet Controller heatsink - 10x10x10mm</P> <P>Compatible with:<BR>• Raspberry Pi - Model A<BR>• Raspberry Pi - Model B<BR>• Raspberry Pi - Model B+<BR>• Raspberry Pi - Model A+<BR>• Raspberry Pi 2 - Model B<BR>• Raspberry Pi 3 - Model B</P></BODY>NoneFalse
Wire Jumpers Male to Female 10 pcsFalsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/RPI-1021Wire Jumpers Male to Female 10 pcs28-01-2016 14:07:0731-12-1899 23:00:0031-12-1899 23:00:00 <BODY><P>MikroElektronika - MIKROE-512, 10 piece Breadboard Jumper Wire kit, male - female, 0.15m, multiple colours</P> <P>These 15 cm jumper leads for plug-in type matrix breadboards are ideal for prototyping. Each pack contains 10 leads with a mix of wire insulation colours.</P></BODY>NoneFalse0100000010174
Delock Mounting Kit för Raspberry pi 30 mmFalsehttps://www.deltaco.dk/varemærke/delock/raspberry-pi/18215Delock Mounting Kit för Raspberry pi 30 mm30-12-2015 06:46:1831-12-1899 23:00:0031-12-1899 23:00:00 <BODY><P>DeLOCK - 18215 Mounting accessories for Raspberry Pi with screws, nuts and standoffs</P> <P>Mounting accessories from DeLOCK that gives you the ability to install other cards on the Raspberry Pi or stack serveral Raspberry Pi on top of each other.</P> <P>• 4xM2.5 Standoffs 30mm in length<BR>• 4xM2.5 4mm Screws<BR>• 4xNuts</P> <P></P></BODY>NoneFalse4043619182152
Delock Montagezubehör För Respberry pi 10 mmFalsehttps://www.deltaco.dk/varemærke/delock/raspberry-pi/18214Delock Montagezubehör För Respberry pi 10 mm30-12-2015 06:36:4831-12-1899 23:00:0031-12-1899 23:00:00 <BODY><P>DeLOCK - 18214 Mounting accessories for Raspberry Pi with screws, nuts and standoffs</P> <P>Mounting accessories from DeLOCK that gives you the ability to install other cards on the Raspberry Pi or stack serveral Raspberry Pi on top of each other.</P> <P>• 4xM2.5 Standoffs 10mm in length<BR>• 4xM2.5 4mm Screws<BR>• 4xStandoffs</P></BODY>NoneFalse4043619182145
RS Pro PoE Switch HAT for Raspberry PiFalsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/897-7141RS Pro PoE Switch HAT for Raspberry Pi11-11-2011 09:11:1131-12-1899 23:00:0031-12-1899 23:00:00 <BODY><P>RS Pro Power over Ethernet (PoE) Switch HAT for Raspberry Pi</P> <P>This Power over Ethernet (PoE) Switch HAT powers your Pi board using ethernet, meaning that there is no need for a power supply (this requires your switch to support this). You can plug the HAT right on top of your Pi and start working on your project straightaway. The HAT comes with one ethernet cable plus mounting hardware.</P> <P>Works with:<BR>• Raspberry Pi 1 Model A+<BR>• Raspberry Pi 1 Model B+<BR>• Raspberry Pi 2 Model B<BR>• Raspberry Pi 3 Model B<BR>• Raspberry Pi 3 Model B+<BR>• Raspberry Pi 3 Model A+</P> <P>Features & Benefits of the PoE Switch HAT<BR>• Doesn't block the GPIO pins — great if you want to add on extra boards<BR>• No assembly or soldering needed<BR>• On/off button<BR>• 802.3af (mode A and B) PoE<BR>• Class 0 device<BR>• Fully isolated switched mode power supply (SMPS), 1500 V isolation input to output<BR>• Overload and short circuit protection<BR>• Overtemperature protection<BR>• Up to 87% high efficiency regulated output<BR>• 36-56 V input voltage<BR>• 5 V output voltage<BR>• 10-1300 mA output power<BR>• 6.5 W maximum output power<BR>• ATtiny 13 A microcontroller for power management</P></BODY>NoneFalse5056112246534
Raspberry Pi heatsinks for Pi and Pi 2/3, 2 parts, bulk, silverFalsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/RPI-1035Raspberry Pi heatsinks for Pi and Pi 2/3, 2 parts, bulk, silver22-04-2016 12:04:1431-12-1899 23:00:0005-03-2019 11:03:13 <BODY><P>ModMyPi heatsinks for Raspberry Pi and Pi 2/3, 2 parts, bulk, silver</P> <P>The kit consists of two high quality aluminum heatsink, each selected to perfectly match the size of the CPU and Ethernet controller.</P> <P>• Broadcom CPU heatsink - 14x14x14mm<BR>• Ethernet Controller heatsink - 10x10x10mm<BR></P></BODY>NoneFalse
MikroElektronika MIKROE-513 10-pack jumperkablar hane-haneFalsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/RPI-1043MikroElektronika MIKROE-513 10-pack jumperkablar hane-hane28-06-2016 07:11:1131-12-1899 23:00:0020-03-2019 08:10:49 <BODY><P>MikroElektronika MIKROE-513, 10 pack Breadboard Jumper Wire kit, male - male, 0.15m, mixed colours</P> <P>These 15 cm jumper leads for plug-in type matrix breadboards are ideal for prototyping. Each pack contains 10 leads with a mix of wire insulation colours. </P></BODY>NoneFalse0100000010150
Micro USB cable with on/off switch for Raspberry Pi, bulk, 1,5m, blackFalsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/RPI-1037Micro USB cable with on/off switch for Raspberry Pi, bulk, 1,5m, black22-04-2016 11:00:2231-12-1899 23:00:0009-04-2019 10:52:21 <BODY><P>USB cable with on/off switch for Raspberry Pi, bulk, 1,5m, USB Type A M, Micro USB Type B M, black</P> <P>This cable with on / off switch is ideal for getting a switch to your Raspberry Pi. It can be used in conjunction with a USB charger, and it is made with 22AWG leadartjocklek so it can handle 2Ampere power.</P> <P>• 22AWG<BR>• Handles 2A</P></BODY>NoneFalse
Raspberry Pi Premium Jumper Wires, 40-pins, hun-han, 200mmFalsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/RPI-1004Raspberry Pi Premium Jumper Wires, 40-pins, hun-han, 200mm11-11-2011 09:11:1131-12-1899 23:00:0025-04-2019 03:39:32 <BODY>Raspberry Pi Premium Jumper Wires - 40-pins jumper-kabel, hun - han, bulk, 200mm, regnbuefarvet<BR><BR>Jumper-kabel med 40-pins til dig der vil eksperimentere med din Raspberry PI eller med breadboard. Kablet kan deles på for at få 40 separate kabler.</BODY>NoneFalse7333048005922
pi-topSPEAKER, speaker module for pi-topCEED, greenFalsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/RPI-1056pi-topSPEAKER, speaker module for pi-topCEED, green11-11-2011 09:11:1131-12-1899 23:00:0030-04-2019 04:57:19 <BODY><P>Pi-Top PT-ADD-SPEAK-01 Speaker for use with Pi-Top, green</P> <P>The pi-topSPEAKER is a speaker module. To give sound to the pi-top, add the pi-topSPEAKER to the Modular Rail. Also the speaker set can be set to mono or stereo (left and right) output by using the switch on the bottom.</P> <P>•Modular design, attach up to 3 in a row<BR>•Left, Right and Mono mix selection<BR>•High-quality SPDIF digital audio from HDMI<BR>•2 W per module<BR>•I2C controlled</P></BODY>NoneFalse