OK

 

 

 

 

 

Pi Supply Raspberry Pi and Pi PoE HAT Case, black31-12-1899 23:00:00124-93725637316366Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/chassis/124-9372Pi Supply Raspberry Pi and Pi PoE HAT Case, black <BODY><P>Pi Supply Pi PoE Switch HAT Case, case for Raspberry Pi and Pi PoE Switch HAT, black</P> <P>From Pi Supply comes this box to enclose and protect your PoE switch HAT and a Raspberry Pi. This Raspberry Pi case has a robust and stylish design and is made of black polycarbonate. The box has cutouts for all ports and contacts.</P> <P>• Fits Pi Model B+, Pi 2 Model B, Pi 3 Model B and Pi 3 Model B+<BR>• Robust and stylish black polycarbonate design<BR>• Cutouts for accessing ports and contacts<BR>• Cutouts allow status lights to be visible through the box<BR>• Mounting rails on both sides of the case for wall mounting<BR>• Supplied with four rubber feet for added stability</P> <P>Product size: 90x45x85xmm</P></BODY>False0616909468188
Raspberry Pi official PoE HAT, for Pi 3 Model B+, onboard fan31-12-1899 23:00:00RPI-POEHAT5637324688Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/RPI-POEHATRaspberry Pi official PoE HAT, for Pi 3 Model B+, onboard fan <BODY><P>Raspberry Pi official PoE HAT, for Raspberry Pi 3 Model B+, onboard fan</P> <P>The Raspberry Pi PoE HAT is used to power a Raspberry Pi 3 Model B+ via an Ethernet cable. Just make sure you are using PoE compatible equipment and cables.</P> <P>• 802.3af PoE<BR>• Fan control<BR>• 5V/2.5A DC output<BR>• 37–57V DC, Class 2 device<BR>• Fully isolated switched-mode power supply<BR>• 25mm x 25mm brushless fan for processor cooling<BR></P></BODY>False
Raspberry Pi 3 Model B+, single-board computer, Bluetooth, Wi-fi, PoE31-12-1899 23:00:00RPI-3MODBPLUS5637325412Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-3MODBPLUSRaspberry Pi 3 Model B+, single-board computer, Bluetooth, Wi-fi, PoE <BODY><P>Raspberry Pi 3 Model B+, 1.4 GHz single-board computer, dual band wi-fi, Bluetooth 4.2, PoE capable</P> <P>The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz<BR>and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT.<BR>The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced<BR>wireless LAN compliance testing, improving both cost and time to market.</P> <P>The Raspberry Pi 3 Model B+ maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B but there is a slight difference on the parts soldered on. This means, among other things, that you can use the same power supply as the Pi 3 but some cases does not fit well.</P> <P>Specifications<BR>• Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4GHz<BR>• 1GB LPDDR2 SDRAM<BR>• 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN<BR>• Bluetooth 4.2, BLE<BR>• Faster Ethernet (maximum throughput 300Mbps)<BR>• 4 × USB 2.0 ports<BR>• Extended 40-pin GPIO header<BR>• 1 × full size HDMI<BR>• MIPI DSI display port<BR>• MIPI CSI camera port<BR>• 4 pole stereo output and composite video port<BR>• Micro SD format for loading operating system and data storage<BR>• 5V/2.5A DC via micro USB connector<BR>• 5V DC via GPIO header<BR>• Power over Ethernet (PoE)–enabled (requires separate PoE HAT)<BR>• Operating temperature, 0–50 °C<BR>• H.264, MPEG-4 decode (1080p30); H.264 encode (1080p30); OpenGL ES 1.1, 2.0 graphics</P> <P>Product size (WxDxH): 85x17x56mm<BR>Product weight: around 60g</P></BODY>False5060214370165
Adafruit Pi T-Cobbler Plus Kit Breakout 2x20 Pi A+, B+, Pi 2/3, Zero05-09-2018 08:55:4719895637260946Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/raspberry-pi-i-o-kort/1989Adafruit Pi T-Cobbler Plus Kit Breakout 2x20 Pi A+, B+, Pi 2/3, Zero <BODY><P>Adafruit Pi T-Cobbler Plus, Breakout kit for Raspberry Pi</P> <P>The Adafruit T-Cobbler Plus is an add-on prototyping board designed for the Raspberry Pi. It can break out all those huge power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This set makes "cobbling together" prototypes with the Pi effective and easy.</P></BODY>False
Raspberry Pi PiNoir kamera modul, 8MP, 1080P31-12-1899 23:00:00RPI-PINOIR25637209092Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-PINOIR2Raspberry Pi PiNoir kamera modul, 8MP, 1080P <BODY><P>Raspberry PiNoir V2 Camera Module, No IR filter, 1080p, 8MP, Sony IMX219PQ CMOS, 15 pin ribbon cable</P> <P>The Raspberry Pi HD Pi NoIR Camera Board connects to any Raspberry Pi or Compute Module, allowing you to create HD video and still photographs. The Pi NoIR (No Infrared) is the same as the standard camera module but without an IR filter. Therefore it is great for photography and video in the dark.</P> <P>The module utilises the IMX219PQ image sensor from Sony which offers high-speed video imaging and high sensitivity. The Pi NoIR module offers reduced image contamination such as fixed pattern noise & smearing. It also features automatic control functions such as exposure control, white balance & luminance detection.</P> <P>A 15 cm ribbon cable attached to the module slots straight into your Pi Camera Serial Interface port (CSI). Once connected, you can access the camera board via the Multi-Media Abstraction Layer (MMAL) or the Video for Linux (V4L) APIs. Alternatively there are libraries such as Picamera Python, and many others that you can find online.</P></BODY>False5056070923874
Raspberry Pi kamera modul, 8MP, 1080P31-12-1899 23:00:00RPI-CAMV25637209091Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-CAMV2Raspberry Pi kamera modul, 8MP, 1080P <BODY><P>Raspberry Pi Camera Module V2 Video Module, 1080p, 8 MP, Sony IMX219PQ CMOS, 15-pin ribbon cable</P> <P>The Raspberry Pi High Definition (HD) Camera Board connects to any Raspberry Pi or Compute Module, allowing you to create HD video and still photographs.<BR>It utilises the IMX219PQ image sensor from Sony which offers high-speed video imaging and high sensitivity.<BR>The Raspberry Pi Camera Module offers reduced image contamination such as fixed pattern noise & smearing. It also features automatic control functions such as exposure control, white balance & luminance detection.</P> <P>A 15 cm ribbon cable attached to the module slots straight into your Pi Camera Serial Interface port (CSI). Once connected, you can access the camera board via the Multi-Media Abstraction Layer (MMAL) or the Video for Linux (V4L) APIs. Alternatively there are libraries such as Picamera Python, and many others that you can find online.</P></BODY>False5056070923867
Micro USB cable with on/off switch for Raspberry Pi, bulk, 1,5m, black31-12-1899 23:00:00RPI-10375637207654Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/RPI-1037Micro USB cable with on/off switch for Raspberry Pi, bulk, 1,5m, black <BODY><P>USB cable with on/off switch for Raspberry Pi, bulk, 1,5m, USB Type A M, Micro USB Type B M, black</P> <P>This cable with on / off switch is ideal for getting a switch to your Raspberry Pi. It can be used in conjunction with a USB charger, and it is made with 22AWG leadartjocklek so it can handle 2Ampere power.</P> <P>• 22AWG<BR>• Handles 2A</P></BODY>False
Raspberry Pi Official Case Black/Grey31-12-1899 23:00:00RPI-BOX175637197914Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/chassis/RPI-BOX17Raspberry Pi Official Case Black/Grey <BODY><P>Official Raspberry Pi 3 Model B/B+, Pi 2 Model B/B+ chassi (bulk), two part, black/grey</P> <P>The Official Raspberry Pi 3 Model B/B+ case. Easy snap-fit assembly, it has plastic LED light protector and cut-outs for all connectors.</P></BODY>False640522710980
Wire Jumpers Male to Female 10 pcs31-12-1899 23:00:00RPI-10215637190387Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/RPI-1021Wire Jumpers Male to Female 10 pcs <BODY><P>MikroElektronika - MIKROE-512, 10 piece Breadboard Jumper Wire kit, male - female, 0.15m, multiple colours</P> <P>These 15 cm jumper leads for plug-in type matrix breadboards are ideal for prototyping. Each pack contains 10 leads with a mix of wire insulation colours.</P></BODY>False0100000010174
Raspberry Pi 7" official LCD touch display, 800x480, capacitive, black31-12-1899 23:00:00RPI-LCD75637165578Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/billedeskærme/RPI-LCD7Raspberry Pi 7" official LCD touch display, 800x480, capacitive, black <BODY><P>7" LCD-touch screen for Raspberry Pi, 10 point capacative touch, 800x480, black</P> <P>The eargerly awaited 7" Official Raspberry Pi Touchscreen Display is finally hear! Boasting a neat 800×480 display @ 60fps resolution, and 10 point capacitive touchscreen, this 7" screen for the Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects</P> <P>The 800x 480 display connects via an adapter board which handles power and signal conversion.Only two connections to the Pi are required; power from the Pi’s GPIO port and a ribbon cable that connects to the DSI port present on all Raspberry Pi’s. Touchscreen drivers with support for 10-finger touch and an on-screen keyboard are available on the latest Raspbian OS for full functionality without a physical keyboard or mouse.</P> <P>• Turn your Raspberry Pi into a touchscreen tablet, infotainment system, or standalone device.<BR>• Truly Interactive - the latest software drivers will support a virtual ‘on screen’ keyboard, so there is no need to plug in a keyboard and mouse.<BR>• Make your own ‘Internet of Things’ (IoT) devices including a visual display. Simply connect your Raspberry Pi, develop a Python script to interact with the display, and you’re ready • to create your own home automation devices with touchscreen capability.<BR>• A range of educational software and programs available on the Raspberry Pi will be touch enabled, making learning and programming easier on the Raspberry Pi.<BR>• Raspberry Pi mounting points on the back</P> <P>Technical Specification:</P> <P>• 7” Touchscreen Display.<BR>• Screen Dimensions: 194mm x 110mm x 20mm (including standoffs)<BR>• Viewable screen size: 155mm x 86mm<BR>• Screen Resolution 800 x 480 pixels<BR>• 10 finger capacitive touch.<BR>• Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.<BR>• Adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the Raspberry Pi.</P> <P>Dimensions(WxDxH): 194x20x110mm.</P></BODY>False5056070923850

 

 

 

Raspberry Pi Zero, seperate GPIO headers, microSD, green31-12-1899 23:00:00RPI-ZEROH5637350918Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-ZEROHRaspberry Pi Zero, seperate GPIO headers, microSD, green <BODY><P>Raspberry Pi Zero, seperate GPIO headers, microSD, green</P> <P>The Raspberry Pi Zero is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough for any project!</P> <P>• Mini HDMI port<BR>• Micro USB power<BR>• 1GHz Single-Core CPU<BR>• Composite video headers<BR>• MicroSD/SDHC (Up to 32GB)<BR>• HAT-compatible 40-pin header</P> <P>Dimensions(BxDxH): 65 x 30 x 5 mm<BR>Weight: 9 g</P></BODY>False
Raspberry Pi Zero W, seperate GPIO headers, WiFi+BT, microSD, green31-12-1899 23:00:00RPI-ZEROWH5637350917Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-ZEROWHRaspberry Pi Zero W, seperate GPIO headers, WiFi+BT, microSD, green <BODY><P>Raspberry Pi Zero W, seperate GPIO headers, WiFi+BT, microSD, green</P> <P>The Raspberry Pi Zero is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough for any project!</P> <P>• Mini HDMI port<BR>• Micro USB power<BR>• 1GHz Single-Core CPU<BR>• Composite video headers<BR>• MicroSD/SDHC (Up to 32GB)<BR>• HAT-compatible 40-pin header<BR>• Integrated WiFi and Bluetooth connectivity</P> <P>Dimensions(BxDxH): 65 x 30 x 5 mm<BR>Weight: 9 g</P></BODY>False
Raspberry Pi 3 Model B+, single-board computer, Bluetooth, Wi-fi, PoE31-12-1899 23:00:00RPI-3MODBPLUS5637325412Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-3MODBPLUSRaspberry Pi 3 Model B+, single-board computer, Bluetooth, Wi-fi, PoE <BODY><P>Raspberry Pi 3 Model B+, 1.4 GHz single-board computer, dual band wi-fi, Bluetooth 4.2, PoE capable</P> <P>The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz<BR>and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT.<BR>The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced<BR>wireless LAN compliance testing, improving both cost and time to market.</P> <P>The Raspberry Pi 3 Model B+ maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B but there is a slight difference on the parts soldered on. This means, among other things, that you can use the same power supply as the Pi 3 but some cases does not fit well.</P> <P>Specifications<BR>• Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4GHz<BR>• 1GB LPDDR2 SDRAM<BR>• 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN<BR>• Bluetooth 4.2, BLE<BR>• Faster Ethernet (maximum throughput 300Mbps)<BR>• 4 × USB 2.0 ports<BR>• Extended 40-pin GPIO header<BR>• 1 × full size HDMI<BR>• MIPI DSI display port<BR>• MIPI CSI camera port<BR>• 4 pole stereo output and composite video port<BR>• Micro SD format for loading operating system and data storage<BR>• 5V/2.5A DC via micro USB connector<BR>• 5V DC via GPIO header<BR>• Power over Ethernet (PoE)–enabled (requires separate PoE HAT)<BR>• Operating temperature, 0–50 °C<BR>• H.264, MPEG-4 decode (1080p30); H.264 encode (1080p30); OpenGL ES 1.1, 2.0 graphics</P> <P>Product size (WxDxH): 85x17x56mm<BR>Product weight: around 60g</P></BODY>False5060214370165
Raspberry Pi 3 Premium Display Kit11-09-2018 03:59:02RPI-10525637305965Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-1052Raspberry Pi 3 Premium Display Kit <BODY><P>Raspberry Pi 3 Premium Display Kit, Raspberry Pi 3 Model B, USB PSU, Touch Screen with case, 8GB micro-SD card with NOOBS, black</P> <P>This kit brings together some of our most popular Raspberry Pi accessories into one kit. It has everything to get the Raspberry Pi working with the Raspberry Pi Touch Screen Display. <BR>The included SD card is pre-installed with NOOBS which provides a simple way to install the various operating systems (OS) that are available for Pi.</P> <P>What is in the Raspberry Pi 3 Premium Display Kit?</P> <P>• Raspberry Pi 3 B Computer Board<BR>• Official Raspberry Pi USB Power Supply<BR>• Official Raspberry Pi Touch Screen LCD <BR>• Official Raspberry Pi Touch Screen Case<BR>• 8 GB micro-SD card with operating system - New Out Of Box Software (NOOBS)</P> <P>Raspberry Pi 3 (Model B)</P> <P>Raspberry Pi 3 has more processing power and now includes wireless connectivity directly on the PCB. With both WiFi and Bluetooth integrated into the Pi 3, it makes connected projects far quicker and easier than ever before.</P> <P>micro-SD card with NOOBS Software</P> <P>The included micro-SD card has NOOBS software pre-installed. If you want to choose an OS for your Pi, then before turning it on, connect it to the Internet via Ethernet otherwise Raspbian is installed. The operating systems available for Raspberry Pi are:</P> <P>• Raspbian<BR>• Pidora<BR>• OpenElec<BR>• RaspBMC<BR>• RISC OS<BR>• Arch<BR>• Linux</P> <P>Note! The Official Pi 3 Power Supply Unit is for the Pi 3 board only. The power supply unit is not a general purpose power supply.</P></BODY>False0700461317708
Raspberry Pi PiNoir kamera modul, 8MP, 1080P31-12-1899 23:00:00RPI-PINOIR25637209092Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-PINOIR2Raspberry Pi PiNoir kamera modul, 8MP, 1080P <BODY><P>Raspberry PiNoir V2 Camera Module, No IR filter, 1080p, 8MP, Sony IMX219PQ CMOS, 15 pin ribbon cable</P> <P>The Raspberry Pi HD Pi NoIR Camera Board connects to any Raspberry Pi or Compute Module, allowing you to create HD video and still photographs. The Pi NoIR (No Infrared) is the same as the standard camera module but without an IR filter. Therefore it is great for photography and video in the dark.</P> <P>The module utilises the IMX219PQ image sensor from Sony which offers high-speed video imaging and high sensitivity. The Pi NoIR module offers reduced image contamination such as fixed pattern noise & smearing. It also features automatic control functions such as exposure control, white balance & luminance detection.</P> <P>A 15 cm ribbon cable attached to the module slots straight into your Pi Camera Serial Interface port (CSI). Once connected, you can access the camera board via the Multi-Media Abstraction Layer (MMAL) or the Video for Linux (V4L) APIs. Alternatively there are libraries such as Picamera Python, and many others that you can find online.</P></BODY>False5056070923874
Raspberry Pi kamera modul, 8MP, 1080P31-12-1899 23:00:00RPI-CAMV25637209091Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-CAMV2Raspberry Pi kamera modul, 8MP, 1080P <BODY><P>Raspberry Pi Camera Module V2 Video Module, 1080p, 8 MP, Sony IMX219PQ CMOS, 15-pin ribbon cable</P> <P>The Raspberry Pi High Definition (HD) Camera Board connects to any Raspberry Pi or Compute Module, allowing you to create HD video and still photographs.<BR>It utilises the IMX219PQ image sensor from Sony which offers high-speed video imaging and high sensitivity.<BR>The Raspberry Pi Camera Module offers reduced image contamination such as fixed pattern noise & smearing. It also features automatic control functions such as exposure control, white balance & luminance detection.</P> <P>A 15 cm ribbon cable attached to the module slots straight into your Pi Camera Serial Interface port (CSI). Once connected, you can access the camera board via the Multi-Media Abstraction Layer (MMAL) or the Video for Linux (V4L) APIs. Alternatively there are libraries such as Picamera Python, and many others that you can find online.</P></BODY>False5056070923867
Raspberry Pi 3 Model B, single computer board31-12-1899 23:00:00RPI-10325637197908Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-1032Raspberry Pi 3 Model B, single computer board <BODY><P>Raspberry Pi 3 Model B, One card computer, 1GB LPDDR2, Quad Core Arm Cortex-A53 1.2GHz, Dual Core VideoCore IV multimedia-coprocessor, Wi-Fi, Bluetooth</P> <P>The Raspberry Pi 3 Model B is the third generation Raspberry Pi. This powerful credit-card sized single board computer can be used for many applications and supersedes the original Raspberry Pi Model B+ and Raspberry Pi 2 Model B. Whilst maintaining the popular board format the Raspberry Pi 3 Model B brings you a more powerful processer, 10x faster than the first generation Raspberry Pi. Additionally it adds wireless LAN & Bluetooth connectivity making it the ideal solution for powerful connected designs.</P> <P>Specifications</P> <P>Processor<BR>• Broadcom BCM2387 chipset<BR>• 1.2GHz Quad-Core ARM Cortex-A53 (64Bit)<BR>• 802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)</P> <P>GPU<BR>• Dual Core VideoCore IV® Multimedia Co-Processor. Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode.<BR>• Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure</P> <P>Memory<BR>• 1GB LPDDR2</P> <P>Operating System<BR>• Boots from Micro SD card, running a version of the Linux operating system or Windows 10 IoT</P> <P>Power<BR>• Micro USB socket 5V1, 2.5A</P> <P>Connectors</P> <P>Ethernet<BR>• 10/100 BaseT Ethernet socket</P> <P>Video Output<BR>• HDMI (rev 1.3 & 1.4)<BR>• Composite RCA (PAL and NTSC)</P> <P>Audio Output<BR>• Audio Output 3.5mm jack<BR>• HDMI<BR>• USB 4 x USB 2.0 Connector</P> <P>GPIO Connector<BR>40-pin 2.54 mm (100 mil) expansion header: 2x20 strip<BR>Providing 27 GPIO pins as well as +3.3 V, +5 V and GND supply lines</P> <P>Camera Connector<BR>• 15-pin MIPI Camera Serial Interface (CSI-2)</P> <P>Display Connector<BR>• Display Serial Interface (DSI) 15 way flat flex cable connector with two data lanes and a clock lane</P> <P>Memory Card Slot<BR>Push/pull Micro SDIO</P> <P>Dimensions: 56x85x17mm</P></BODY>False5060214370172
Raspberry pi Sense Hat31-12-1899 23:00:00RPI-10225637190388Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/raspberry-pi-i-o-kort/RPI-1022Raspberry pi Sense Hat <BODY><P>Raspberry Pi - Sense Hat, expansion board for making an Astro Pi<BR><BR>The Sense HAT from the folks at Raspberry Pi is an add-on board that fits perfectly on top of your Pi to provide you with plenty of sensing functionality. This means that the Sense HAT is great for learning about environmental conditions, particularly within space science. Sense HAT + Pi Board = Astro Pi!</P> <P>What's on-board the Pi Sense HAT?<BR>• 8 x 8, 16-bit LED display that outputs sense data via shapes, icons and messages<BR>• Inertial Measurement Unit (IMU) — essential for velocity, orientation and gravity measurement of a space craft, the IMU combines an accelerometer, gyroscope and magnetometer into one chip <BR>• Barometric air pressure sensor<BR>• Temperature sensor<BR>• Humidity sensor<BR>• 5-button joystick that serves as an on-board keyboard and mouse</P> <P>How do I get started with the Pi Sense HAT?<BR>Once the HAT is assembled with your Pi board, you will need to install Astro Pi software. You can now start to program — the Raspberry Pi Foundation provide great examples to start programming with such as showing a rainbow of colours on the LED display or rotating the LED display. Channel the Tim Peake in you...</P> <P>See <A href="https://www.raspberrypi.org/learning/astro-pi-guide/">https://www.raspberrypi.org/learning/astro-pi-guide/</A></P> <P>Note: You will need eight M2.5 screws and four hexagonal standoffs to attach the HAT to your Pi.</P></BODY>False
Wire Jumpers Male to Female 10 pcs31-12-1899 23:00:00RPI-10215637190387Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/tilbehør/RPI-1021Wire Jumpers Male to Female 10 pcs <BODY><P>MikroElektronika - MIKROE-512, 10 piece Breadboard Jumper Wire kit, male - female, 0.15m, multiple colours</P> <P>These 15 cm jumper leads for plug-in type matrix breadboards are ideal for prototyping. Each pack contains 10 leads with a mix of wire insulation colours.</P></BODY>False0100000010174
Raspberry Pi 7" official LCD touch display, 800x480, capacitive, black31-12-1899 23:00:00RPI-LCD75637165578Falsehttps://www.deltaco.dk/kategorier/pc-komponenter/bundkort/raspberry-pi/billedeskærme/RPI-LCD7Raspberry Pi 7" official LCD touch display, 800x480, capacitive, black <BODY><P>7" LCD-touch screen for Raspberry Pi, 10 point capacative touch, 800x480, black</P> <P>The eargerly awaited 7" Official Raspberry Pi Touchscreen Display is finally hear! Boasting a neat 800×480 display @ 60fps resolution, and 10 point capacitive touchscreen, this 7" screen for the Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects</P> <P>The 800x 480 display connects via an adapter board which handles power and signal conversion.Only two connections to the Pi are required; power from the Pi’s GPIO port and a ribbon cable that connects to the DSI port present on all Raspberry Pi’s. Touchscreen drivers with support for 10-finger touch and an on-screen keyboard are available on the latest Raspbian OS for full functionality without a physical keyboard or mouse.</P> <P>• Turn your Raspberry Pi into a touchscreen tablet, infotainment system, or standalone device.<BR>• Truly Interactive - the latest software drivers will support a virtual ‘on screen’ keyboard, so there is no need to plug in a keyboard and mouse.<BR>• Make your own ‘Internet of Things’ (IoT) devices including a visual display. Simply connect your Raspberry Pi, develop a Python script to interact with the display, and you’re ready • to create your own home automation devices with touchscreen capability.<BR>• A range of educational software and programs available on the Raspberry Pi will be touch enabled, making learning and programming easier on the Raspberry Pi.<BR>• Raspberry Pi mounting points on the back</P> <P>Technical Specification:</P> <P>• 7” Touchscreen Display.<BR>• Screen Dimensions: 194mm x 110mm x 20mm (including standoffs)<BR>• Viewable screen size: 155mm x 86mm<BR>• Screen Resolution 800 x 480 pixels<BR>• 10 finger capacitive touch.<BR>• Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.<BR>• Adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the Raspberry Pi.</P> <P>Dimensions(WxDxH): 194x20x110mm.</P></BODY>False5056070923850