OK

 

 

 

Navilock NL-8002U USB 2.0 Multi GNSS Receiver u-blox 8 1.5 mFalsehttps://www.deltaco.dk/kategorier/hjem-fritid/gps/62523Navilock NL-8002U USB 2.0 Multi GNSS Receiver u-blox 8 1.5 m29-11-2019 12:54:2731-12-1899 23:00:0031-12-1899 23:00:00False <BODY><P>Navilock NL-8002U USB 2.0 Multi GNSS Receiver u-blox 8 UBX-M8030-KT chipset, 1.5 m, black</P> <P>The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation.</P> <P>• Connector: USB 2.0 type A male<BR>• u-blox 8 UBX-M8030-KT chipset<BR>• Frequency:<BR>  GPS: L1, 1575.4200 MHz<BR>  GLONASS: L1, 1602 (k x 0,5625) MHz<BR>  BEIDOU COMPASS: B1, 1561.0980 MHz<BR>  GALILEO E1, 1575.4200 MHz<BR>  QZSS L1, 1575.4200 MHz<BR>• Accepts the signals of up to 72 satellites at the same time<BR>• Supports AssistNow online/offline,<BR>  SBAS (WAAS, EGNOS, QZSS and MSAS)<BR>• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG<BR>• USB specification 2.0<BR>• Auto Baud Rate up to 115200 bps<BR>• Update rate:<BR>  single GNSS: 18 Hz (e.g. GPS solo)<BR>  multi GNSS: 10 Hz (e.g. GPS+GLONASS)<BR>• Sensibility max. –167 dBm<BR>• IPX6 protection class<BR>• Magnetic, non-slip on the bottom<BR>• LED-indicator for GPS-status<BR>• Operating temperature: -20 °C ~ 60 °C<BR>• Power supply: 5 Volt<BR>• Current consumption: max. 45 mA<BR>• Cold start in ca. 26 seconds<BR>• Hot start in ca. 1 second<BR>• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and<BR>  2 m CEP with SBAS<BR>• Cable length: ca. 1.5 m</P> <P>System requirements<BR>• Windows Vista/7/8/8.1/10, Linux Kernel 2.6<BR>• PC or laptop with a free USB port<BR>• For devices with OTG function and optional OTG adapter: Windows 10 </P> <P>Package content<BR>• USB 2.0 receiver<BR>• Driver CD<BR>• User manual on CD ROM</P> <P>Dimensions (LxWxH): 65x45x22 mm</P></BODY>NoneTrue4043619625239
GNSS UDR Beidou Galileo Glonass GPS NL-82002UFalsehttps://www.deltaco.dk/kategorier/hjem-fritid/gps/62756GNSS UDR Beidou Galileo Glonass GPS NL-82002U16-06-2017 11:55:5631-12-1899 23:00:0031-12-1899 23:00:00False <BODY><P>Navilock NL-82002U USB 2.0 Multi GNSS UDR Receiver, u-blox NEO-M8U chipset, 1.5 m, black</P> <P>The USB 2.0 Multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted.</P> <P>Note<BR>The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!</P> <P>• Connector: USB 2.0 Type-A male<BR>• Chipset: u-blox NEO-M8U<BR>• Frequency:<BR>  GPS: L1, 1575.4200 MHz<BR>  GLONASS: L1, 1602 (k x 0.5625) MHz<BR>  BEIDOU COMPASS: B1, 1561.0980 MHz<BR>  GALILEO: E1, 1575.4200 MHz<BR>  QZSS: L1, 1575.4200 MHz<BR>• Accepts the signals of up to 72 satellites at the same time<BR>• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)<BR>• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG<BR>• Supports UDR from NMEA 4.1<BR>• Auto Baud Rate up to 115200 bps<BR>• Update rate: up to 20 Hz<BR>• Sensibility max. -160 dBm<BR>• IPX6 protection class<BR>• Magnetic, non-slip on the bottom<BR>• LED-indicator for GPS status<BR>• Operating temperature: -20 °C ~ 60 °C<BR>• Cold start in ca. 26 seconds<BR>• Hot start in ca. 1 second<BR>• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS<BR>• Cable length: ca. 1.5 m</P> <P>System requirements<BR>• Windows Vista/7/8/8.1/10, Linux Kernel 2.6<BR>• PC or laptop with a free USB Type-A port<BR>• For devices with OTG function and optional OTG adapter: Windows 10</P> <P>Package content<BR>• USB 2.0 receiver<BR>• Navilock support CD incl. driver and user manual</P> <P>Dimensions (LxWxH): 65x45x22 mm</P> <P></P></BODY>NoneTrue4043619627561
GNSS Beidou Galileo Glonass GPS NL-8004U u-blox 8 USB roof mount 4,50Falsehttps://www.deltaco.dk/kategorier/hjem-fritid/gps/62531GNSS Beidou Galileo Glonass GPS NL-8004U u-blox 8 USB roof mount 4,5016-06-2017 11:27:2631-12-1899 23:00:0031-12-1899 23:00:00False <BODY><P>Navilock NL-8004U USB 2.0 Multi GNSS Receiver, u-blox 8, 4,5m cable length, IP7x, black</P> <P>The USB 2.0 multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The NL-8004U GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design. </P> <P>Specification <BR>• Connector: USB 2.0 Type-A male<BR>• Chipset: u-blox 8 UBX-M8030-KT<BR>• Frequency:<BR>  GPS: L1, 1575.4200 MHz<BR>  GLONASS: L1, 1602 (k x 0,5625) MHz<BR>  BEIDOU COMPASS: B1, 1561.0980 MHz<BR>  GALILEO E1, 1575.4200 MHz<BR>  QZSS L1, 1575.4200 MHz<BR>• Accepts the signals of up to 72 satellites at the same time<BR>• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)<BR>• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG<BR>• Auto Baud Rate up to 115200 bps<BR>• Update rate:<BR>  single GNSS: 18 Hz (e.g. GPS solo)<BR>  multi GNSS: 10 Hz (e.g. GPS+GLONASS)<BR>• Sensibility max. -167 dBm<BR>• IPX7 protection class<BR>• LED-indicator for GPS status<BR>• Operating temperature: -20 °C ~ 60 °C<BR>• Power supply: 5 V DC<BR>• Current consumption: max. 45 mA<BR>• Cold start in ca. 26 seconds<BR>• Hot start in ca. 1 second<BR>• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS<BR>• Cable length: ca. 4.5 m<BR>• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm</P> <P>Microsoft Sensor and Location Platform (Website)<BR>• Profit from Windows applications (e.g. weather, maps, etc)<BR>• Supporting the GNSS location platform API (32 bit) </P> <P>System requirements <BR>• Windows Vista/7/8/8.1/10, Linux Kernel 2.6<BR>• PC or laptop with a free USB Type-A port<BR>• For devices with OTG function and optional OTG adapter: Windows 10 </P> <P>Package content <BR>• USB 2.0 receiver<BR>• Mounting material: stainless steel nut and washer<BR>• Navilock support CD incl. driver and user manual </P></BODY>NoneFalse4043619625314
GNSS GPS NL-604P u-blox 6 seriell MD6 roof mount 5 mFalsehttps://www.deltaco.dk/kategorier/hjem-fritid/gps/61842GNSS GPS NL-604P u-blox 6 seriell MD6 roof mount 5 m16-06-2017 10:36:1631-12-1899 23:00:0031-12-1899 23:00:00False <BODY><P>Navilock NL-604P MD6 Serial GNSS Receiver, U-blox 6 chipset, IP7x, 5m cable length, black</P> <P>The MD6 serial GNSS Receiver based on u-blox 6 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-604P GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design. </P> <P>Specification <BR>• Connector: MD6 Navilock plug (USB or serial cable are optional available)<BR>• Chipset: u-blox 6 UBX-G6000-BT<BR>• Frequency:<BR>  GPS: L1, 1575.4200 MHz<BR>  GLONASS: L1, 1602.5625 - 1615.5000 MHz<BR>• Accepts the signals of up to 50 satellites at the same time<BR>• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)<BR>• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG<BR>• Auto Baud Rate up to 115200 bps<BR>• Update rate: up to 5 Hz<BR>• Sensibility max. -162 dBm<BR>• IPX7 protection class<BR>• Operating temperature: -20 °C ~ 60 °C<BR>• Power supply: 5 V DC<BR>• Current consumption: max. 80 mA<BR>• Cold start in ca. 25 seconds<BR>• Hot start in ca. 1 second<BR>• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS<BR>• Cable length: ca. 5 m<BR>• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm </P> <P>System requirements <BR>• Windows 98SE/ME/2000/XP/Vista/7/8.1/10, Windows Mobile 2003/5/6,<BR>  Mac OSX, Linux Kernel 2.6<BR>• MD6 connection cable </P> <P>Package content <BR>• MD6 serial receiver<BR>• Mounting material: stainless steel nut and washer<BR>• Navilock support CD incl. driver and user manual </P></BODY>NoneTrue4043619618422
GNSS GPS NL-603P u-blox 6 seriell/MD6/PDA NavilockFalsehttps://www.deltaco.dk/kategorier/hjem-fritid/gps/61841GNSS GPS NL-603P u-blox 6 seriell/MD6/PDA Navilock16-06-2017 09:36:3831-12-1899 23:00:0031-12-1899 23:00:00False <BODY><P>Navilock NL-603 MD6 Serial GNSS Receiver u-blox 6, GPS/GLONASS, IP6, 1.5m cable, black</P> <P>The MD6 serial GNSS Receiver based on u-blox 6 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. </P> <P>Specification <BR>• Connector: MD6 Navilock plug (USB or serial cable are optional available)<BR>• Chipset: u-blox 6 UBX-G6000-BT<BR>• Frequency:<BR>  GPS: L1, 1575.4200 MHz<BR>  GLONASS: L1, 1602 (k x 0.5625) MHz<BR>• Accepts the signals of up to 50 satellites at the same time<BR>• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)<BR>• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG<BR>• Auto Baud Rate up to 115200 bps<BR>• Update rate: up to 5 Hz<BR>• Sensibility max. -162 dBm<BR>• IPX6 protection class<BR>• Magnetic, non-slip on the bottom<BR>• LED-indicator for GPS status<BR>• Operating temperature: -20 °C ~ 60 °C<BR>• Power supply: 5 V DC<BR>• Current consumption: max. 80 mA<BR>• Cold start in ca. 25 seconds<BR>• Hot start in ca. 1 second<BR>• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS<BR>• Cable length: ca. 1.5 m<BR>• Dimensions (LxWxH): ca. 65 x 45 x 22 mm </P> <P>System requirements <BR>• Windows 98SE/ME/2000/XP/Vista/7/8.1/10, Windows Mobile 2003/5/6, Mac OSX ,<BR>  Linux Kernel 2.6<BR>• MD6 connection cable </P> <P>Package content <BR>• MD6 serial receiver<BR>• Navilock support CD incl. driver and user manual </P></BODY>NoneTrue4043619618415
Navilock NL-602U USB 2.0 GPS Receiver u-blox 6, IPX6, 1.5m, blackFalsehttps://www.deltaco.dk/kategorier/hjem-fritid/gps/61840Navilock NL-602U USB 2.0 GPS Receiver u-blox 6, IPX6, 1.5m, black01-06-2017 04:54:1931-12-1899 23:00:0031-12-1899 23:00:00False <BODY><P>Navilock NL-602U USB 2.0 GPS Receiver u-blox 6, IPX6, magnetic, 1.5m, black</P> <P>The USB 2.0 GNSS Receiver based on u-blox 6 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation.</P> <P>• IPX6 protection class<BR>• Sensibility max. -162 dBm<BR>• Magnetic, non-slip on the bottom<BR>• Frequency: GPS L1, 1575.4200 MHz <BR>• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG<BR>• Accepts the signals of up to 50 satellites at the same time<BR>• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)</P> <P>Dimensions (WxLxH): ca 45x65x22mm</P></BODY>NoneFalse4043619618408
GlobalSat ND-105C, GPS-modtager med micro USB -tilslutning, NMEA 0183Falsehttps://www.deltaco.dk/kategorier/hjem-fritid/gps/GPS-147GlobalSat ND-105C, GPS-modtager med micro USB -tilslutning, NMEA 018311-11-2011 09:12:1131-12-1899 23:00:0031-12-1899 23:00:00FalseGlobalSat ND-105C, GPS-modtager med micro USB -tilslutning, NMEA 0183 v3, 66-kanaler, sort<br/><br/>Ekstrem lille og smart GPS-modtager med høj præcision, lav strømforbrug og USB micro interface. Perfekt til mobile enheder med Android og Windows som operativsystem.<br /><br />- Understøtter NMEA 0183 v3, GPGGA,GPGSV, GPRMC, GPGLL og GPVTG protokol.<br />- Tilpasset til mobile enheder med micro USB interface.<br />- Operativ temperatur: -20øC til 60øC.<br />- Inbygget backup-batteri.<br /> <br />Understøtter Vista, Windows Server 2003, Windows 7, Windows 8, Mac OS X 10.x.x<br /> <br />CD-rom med drivere og USB-kabel medfølger .<br /><br />Mål(BxDxH): 33,9x18x8,1mm. <br />Vægt: 20 gram.NoneFalse7340004696087
GlobalSat MR350S4 GPS-modtager, PS/2, til udendørsmontering, 48-kanalFalsehttps://www.deltaco.dk/kategorier/hjem-fritid/gps/GPS-105SGlobalSat MR350S4 GPS-modtager, PS/2, til udendørsmontering, 48-kanal11-11-2011 09:11:1131-12-1899 23:00:0031-12-1899 23:00:00FalseGlobalSat MR350S4 GPS-modtager, PS/2, til udendørsmontering, 48-kanaler, SiRF Star IV<br/><br/>En speciel løsning til at anvendes til udendørsmontering. Den er lavet til at kunne monteres f.eks. på både eller på biltage. Har PS/2-tilslutning. <br /><br />MR350S4 er en opdateret version af MR350 (vores varenummer GPS-105) som har det nye strømbesparelse, hurtigere og mere følsomt chipset SiRF Star IV <br /><br />Kabellængde 4,5m<br />Mål(BxDxH): 62x62x21mm (top) 15x15x10mm (i monteringshuller)NoneFalse7340004689423
GlobalSat BU353S4, GPS-modtager med USB-tilslutning og magnetmonteringFalsehttps://www.deltaco.dk/kategorier/hjem-fritid/gps/GPS-106SGlobalSat BU353S4, GPS-modtager med USB-tilslutning og magnetmontering11-11-2011 09:11:1131-12-1899 23:00:0031-12-1899 23:00:00FalseGlobalSat BU353S4, GPS-modtager med USB-tilslutning og magnetmontering, vandtæt, 48-kanaler, 1,5m kabel, sort<br/><br/>GPS-modtager med høj præcision og bygget til at modstå belastninger.<br /><br />• Fungerer i temperaturer ned til -40 grader.<br />• Strømforsynes via USB.<br /><br />Software og kabelholder medfølger.<br />Mål(BxDxH): 53x53x19,2mm.NoneFalse7340004674870
GlobalSat Adapterkabel til GPS-105. PS/2 til USBFalsehttps://www.deltaco.dk/kategorier/hjem-fritid/gps/GPS-105-K1GlobalSat Adapterkabel til GPS-105. PS/2 til USB11-11-2011 09:11:1131-12-1899 23:00:0031-12-1899 23:00:00FalseGlobalSat Adapterkabel til GPS-105. PS/2 til USB<br/><br/>Til at kunne benytte GPS-105 og GPS-107 selv til computere med USB-tilslutning. PS/2 hun til USB Type A Han. 30cm.NoneFalse7340004625810
Navilock NL-8012U USB 2.0 Multi GNSS Receiver u-blox 8 4.5 mFalsehttps://www.deltaco.dk/kategorier/hjem-fritid/gps/62524Navilock NL-8012U USB 2.0 Multi GNSS Receiver u-blox 8 4.5 m11-11-2011 09:11:1131-12-1899 23:00:0031-12-1899 23:00:00False <BODY><P>Navilock NL-8012U USB 2.0 Multi GNSS Receiver u-blox 8 4.5 m</P> <P>The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation.</P> <P>Specification<BR>• Connector: USB 2.0 Type-A male<BR>• Chipset: u-blox 8 UBX-M8030-KT<BR>• Frequency:<BR>  GPS: L1, 1575.4200 MHz<BR>  GLONASS: L1, 1602 (k x 0,5625) MHz<BR>  BEIDOU COMPASS: B1, 1561.0980 MHz<BR>  GALILEO: E1, 1575.4200 MHz<BR>  QZSS: L1, 1575.4200 MHz<BR>• Accepts the signals of up to 72 satellites at the same time<BR>• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)<BR>• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG<BR>• Auto Baud Rate up to 115200 bps<BR>• Update rate:<BR>  single GNSS: 18 Hz (e.g. GPS solo)<BR>  multi GNSS: 10 Hz (e.g. GPS+GLONASS)<BR>• Sensibility max. -167 dBm<BR>• IPX6 protection class<BR>• Magnetic, non-slip on the bottom<BR>• LED-indicator for GPS status<BR>• Operating temperature: -20 °C ~ 60 °C<BR>• Power supply: 5 V DC<BR>• Current consumption: max. 45 mA<BR>• Cold start in ca. 26 seconds<BR>• Hot start in ca. 1 second<BR>• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS<BR>• Cable length: ca. 4.5 m<BR>• Dimensions (LxWxH): ca. 65 x 45 x 22 mm</P> <P>Microsoft Sensor and Location Platform (Website)<BR>• Profit from Windows applications (e.g. weather, maps, etc)<BR>• Supporting the GNSS location platform API (32 bit)</P> <P>System requirements<BR>• Windows Vista/7/8/8.1/10, Linux Kernel 2.6<BR>• PC or laptop with a free USB Type-A port<BR>• For devices with OTG function and optional OTG adapter: Windows 10</P> <P>Package content<BR>• USB 2.0 receiver<BR>• Navilock support CD incl. driver and user manual</P></BODY>NoneFalse4043619625246
Navilock NL-8044P MD6 Serial Multi GNSS Receiver u-blox 8 10 mFalsehttps://www.deltaco.dk/kategorier/hjem-fritid/gps/62528Navilock NL-8044P MD6 Serial Multi GNSS Receiver u-blox 8 10 m11-11-2011 09:11:1131-12-1899 23:00:0031-12-1899 23:00:00False <BODY><P>NL-8044P MD6 Serial Multi GNSS Receiver u-blox 8 10 m</P> <P>The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8044P GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.</P> <P>Specification<BR>• Connector:<BR>  MD6 Navilock plug (RS-232) (USB or serial cable are optional available)<BR>• Chipset: u-blox 8 UBX-M8030-KT<BR>• Frequency:<BR>  GPS: L1, 1575.4200 MHz<BR>  GLONASS: L1, 1602 (k x 0.5625) MHz<BR>  BEIDOU COMPASS: B1, 1561.0980 MHz<BR>  GALILEO: E1, 1575.4200 MHz<BR>  QZSS: L1, 1575.4200 MHz<BR>• Accepts the signals of up to 72 satellites at the same time<BR>• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)<BR>• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG<BR>• Auto Baud Rate up to 115200 bps<BR>• PPS signal on pin 6 (LVTTL 3.3 V)<BR>• Update rate:<BR>  single GNSS: 18 Hz (e.g. GPS solo)<BR>  multi GNSS: 10 Hz (e.g. GPS+GLONASS)<BR>• Sensibility: max. -167 dBm<BR>• Protection class: IPX7<BR>• Operating temperature: -20 °C ~ 60 °C<BR>• Power supply: 5 V DC<BR>• Cold start in ca. 26 seconds<BR>• Hot start in ca. 1 second<BR>• Positioning accuracy:<BR>  2.5 m CEP (Circular Error Probable)<BR>  2.0 m CEP with SBAS (Circular Error Probable)<BR>• Cable length: ca. 10 m<BR>• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm</P> <P>  Microsoft Sensor and Location Platform (Website)<BR>• Profit from Windows applications (e.g. weather, maps, etc)<BR>• Supporting the GNSS location platform API (32 bit)</P> <P>System requirements<BR>• Windows Vista/7/8/8.1/10, Linux Kernel 2.6, Mac OS X<BR>• MD6 connection cable</P> <P>Package content<BR>• MD6 serial receiver<BR>• Mounting material: stainless steel nut and washer <BR>• Navilock support CD incl. driver and user manual</P></BODY>NoneTrue4043619625284
Navilock NL-442U USB 2.0 GNSS GPS Receiver SiRFstarIV™ 1.5 mFalsehttps://www.deltaco.dk/kategorier/hjem-fritid/gps/61994Navilock NL-442U USB 2.0 GNSS GPS Receiver SiRFstarIV™ 1.5 m11-11-2011 09:11:1131-12-1899 23:00:0031-12-1899 23:00:00False <BODY><P>Navilock NL-442U USB 2.0 GNSS GPS Receiver SiRFstarIV™ 1.5 m, black</P> <P>The USB GPS receiver based on SiRFstarIV™ chipset has a built-in antenna for high sensitivity. It is possible to use this GPS receiver with a laptop and suitable routing software for navigation.</P> <P>Specification<BR>• Connector:<BR>  1 x USB 2.0 Type-A male<BR>• Chipset: SiRFstarIV™ GSD4e<BR>• Frequency:<BR>  GPS: L1, 1575.4200 MHz<BR>• Accepts the signals of up to 48 satellites at the same time<BR>• Supports WAAS, EGNOS and MSAS<BR>• Supports NMEA 0183 V3.0 protocols: GGA, GSA, GSV, RMC, VTG, GLL v2.2 (VTG<BR>  and GLL are optional)<BR>• Baud Rate: 4800 bps<BR>• Update rate: up to 1 Hz<BR>• Datum: WGS 84<BR>• Sensibility: max. -163 dBm<BR>• Protection class: IPX6<BR>• Magnetic, non-slip on the bottom<BR>• LED-indicator for GPS status<BR>• Operating temperature: -20 °C ~ 65 °C<BR>• Power supply: 5 V DC<BR>• Current consumption: ca. 60 mA<BR>• Cold start in ca. 35 seconds<BR>• Hot start in ca. 1 second<BR>• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS<BR>• Cable length: ca. 1.5 m<BR>• Dimensions (LxWxH): ca. 65 x 45 x 22 mm</P> <P>System requirements<BR>• Linux Kernel 2.6 or above<BR>• Mac OS 10 or above<BR>• Windows 2000/XP/Vista/7/8.1/10<BR>• PC or laptop with a free USB Type-A port<BR>• For devices with OTG function and optional OTG adapter: Windows 10, Android ex 2.3</P> <P>Package content<BR>• USB 2.0 receiver<BR>• Navilock support CD incl. driver and user manual</P></BODY>NoneTrue4043619619948
Navilock NL-8022MP MD6 Serial PPS Multi GNSS Receiver u-blox 8 5 mFalsehttps://www.deltaco.dk/kategorier/hjem-fritid/gps/62529Navilock NL-8022MP MD6 Serial PPS Multi GNSS Receiver u-blox 8 5 m11-11-2011 09:11:1131-12-1899 23:00:0031-12-1899 23:00:00False <BODY><P>NL-8022MP MD6 Serial PPS Multi GNSS Receiver u-blox 8 5 m</P> <P>The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8022MP GNSS receiver is especially designed for installation on a white ground (boat, camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.</P> <P><BR>Specification<BR>• Connector: MD6 Navilock plug (RS-232) (USB or serial cable are optional available)<BR>• Chipset: u-blox 8 UBX-M8030-KT<BR>• Frequency:<BR>  GPS: L1, 1575.4200 MHz<BR>  GLONASS: L1, 1602 (k x 0,5625) MHz<BR>  BEIDOU COMPASS: B1, 1561.0980 MHz<BR>  GALILEO: E1, 1575.4200 MHz<BR>  QZSS: L1, 1575.4200 MHz<BR>• Accepts the signals of up to 72 satellites at the same time<BR>• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)<BR>• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG<BR>• Auto Baud Rate up to 115200 bps<BR>• PPS signal on pin 6 (LVTTL 3.3 V)<BR>• Update rate:<BR>  single GNSS: 18 Hz (e.g. GPS solo)<BR>  multi GNSS: 10 Hz (e.g. GPS+GLONASS)<BR>• Sensibility max. -167 dBm<BR>• IPX7 protection class<BR>• Operating temperature: -20 °C ~ 60 °C<BR>• Power supply: 5 V DC<BR>• Current consumption: max. 45 mA<BR>• Cold start in ca. 26 seconds<BR>• Hot start in ca. 1 second<BR>• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS<BR>• Cable length: ca. 5 m<BR>• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm</P> <P>Microsoft Sensor and Location Platform (Website)<BR>• Profit from Windows applications (e.g. weather, maps, etc)<BR>• Supporting the GNSS location platform API (32 bit)</P> <P>System requirements<BR>• Windows Vista/7/8/8.1/10, Linux Kernel 2.6, Mac OS X<BR>• MD6 connection cable</P> <P>Package content<BR>• MD6 serial receiver<BR>• Mounting material: stainless steel nut and washer<BR>• Navilock support CD incl. driver and user manual</P></BODY>NoneTrue4043619625291

 

GPS